Contact Us

TEL: +86-757-28866874

Phone:13702959160
E-mail: boss@hong8.com
Address: Malong Street, Sanle Road, Beijiao Town, Shunde Foshan, Gungdong, China

Ceramic Tile Cutting Machine

Ceramic Tile Cutting Machine

HF Wet type cutting machine series is suitable for cut big tile into several pcs of border tile,skirting tile etc at one time. With suitable press board is can cut min size 10*10mm mosaic. Besides it can also notching on the surface of the tile; Automatic working with large capacity and low edge breakage.

Ceramic Tile Cutting Machine


Product Description

1. HF-1-600/800 Multi-saw ceramic tile cutting machine,ceramic cutting machine with multi saw,ceramic cutting machine is suitable for cutting big tile into small pcs such as cutting 600*600mm tile into 600*200mm tile at one time.

2. The main shaft can installed with max 15 pcs of cutting blades.

3. Besides cutting it also can slotting on the surface of tile.


  • Gantry type of the main cutting shaft both size of shaft have fixed in the machine to make sure working stable;

  • Automatic sliding side lifting up;

  • Automatic oiling with  convenient  maintenance;


Function and Characteristics:

Adopt PLC control the phase adjustment of each printing unit, operate easily.

All transmission rollers are made of high quality steel, plate with the hard chromium, surface is ground.

Driving gears are made of 40Cr high grade alloy steel and ground, the Rockwell hardness is ≥ 50 after the heat treatment.

Each unit adopt electric separating and pneumatic locking and whole locking. The alarm rings during the walking to ensure the safety of the operator. Different type of alarm sounding for start and stop the machine.

Using two hands together to press the start to button to ensure the safety of the operator.

There is dead-stop button in the front, middle and back of the machine.

There is instruction light (LED three-color instruction light) for the equipment electrifying, awaiting working and in unusual condition.

There is a dead-stop button in each unit of printing machine, the operator can stop each unit when in the middle of each unit to keep the operator safety.


 

Specification:


No. 

Description

Unit 

HF-1-600

HF-1-800

1.

Numbers of main shaft

pc

1

1

2.

Belt width

mm

630

830

3.

Blade diameter

mm

Φ180-Φ250

Φ180-Φ250

4.

Power of main shaft motor

kw

15

15

5.

Power of belt motor

Kw

0.75

0.75

6.

Speed range of conveying belt

m/min

0.6-3.0

0.6-3.0

7..

Power of lifting motor

kw

0.75

0.75

8..

Cutting width range

mm

20-600

20-800

9.

Maximum cutting thickness

mm

20

20

10.

Total power

kw

16.5

16.5

11.

Dimension 

m

2.1*1.5x1.63

2.1*1.7*1.8

12.

Weight 

Kg

1300

1400



FAQ


1.Whats the difference between HF-1/600 Wet type cutting machine with single blade and HF-1/800 Wet type cutting machine with single blade?

HF-1/600 can max cut max 600mm tile with 600mm width belt and HF-1/800 can cut max 800mm tile with 800mm width belt.


2.Whats the difference between HF Wet type cutting machine with single blade and HF Wet type cutting machine with double blades?

HF Wet type cutting machine with single blade including 1 set of main cutting shaft can cut tile at one time;

HF Wet type cutting machine with double blades including 2 sets of main cutting shafts first shaft cutting half of tile,and second shaft cut off the tile.





If you are looking for the ceramic tile cutting machine, welcome to contact our factory. As one of the leading ceramic & stone deep processing machine manufacturers and suppliers in China, we are always at your service.
Hot Tags: ceramic tile cutting machine, China, factory, manufacturers, suppliers
Inquiry